Get Superior Grounding Solutions Direct From The Factory With Our 10kV Composite Pillar Grounding Ring

With the progress of urban and rural power grid transformation technology, 10KV distribution network lines are more often using insulated wires that are safer and more reliable in operation.The 10KV composite pillar grounding ring is integrally injection-molded with silicone rubber, which has good hydrophobicity and excellent insulation performance. It uses special fittings and piercing clips, and the fittings produce uniform plastic deformation through synchronous crimping technology, and the interface characteristics are stable. This product adopts pillar type composite insulator combined with piercing wire clip and grounding hanging ring, which can completely solve the risk of distortion and deformation of high voltage fuse caused by hanging and dismantling grounding wire, loss of strands and even dismantling, and will not cause poor contact between grounding hanging ring and high voltage fuse due to the pushing and pulling effect of hanging and dismantling grounding wire on grounding hanging ring during power outage and maintenance. The product does not need to peel off the wire insulation skin, easy and reliable installation, greatly facilitate the short-circuit grounding wire and personal protection grounding wire hookup during power construction, effectively prevent equipment, lines from sudden incoming calls, eliminate induced voltage, prevent residual charge on the operator's injury.

Technical Parameter

Structure、Size Parameter Table

No.	Type	Structure Height mm	Min. Creepage Distance mm	Min. Nominal Creepage Distance mm	Umbrella Diameter mm	Thread Length mm	Applicable Wire Cross Section mm²
1	FZJH10-95/25	400±15	185	480	150/120±0.5	M20x40	25~95
2	FZJH10-185/95	400±15	185	480	150/120±0.5	M20x40	95~185
3	FZJH10-240/150	400±15	185	480	150/120±0.5	M20x40	150~240
4	FZJH10-240/240	400±15	185	480	150/120±0.5	M20x40	240

Mechanical、Electrical Performance Parameter Table

No.	Type	Rated Mechanical Load kN	Lightning Impulse Withstand Voltage（peak） kV	Industrial frequency dry withstand voltage（rms） kV	Industrial frequency wet withstand voltage（rms） kV	Nom. Current A	Dynamic Stability Test DL/T879-2004	Thermal Stability Test DL/T879-2004
1	FZJH10-95/25	4	≥75	≥42	≥50	476	≤18.3kA 0.1s	7.3kA/1°-5%S
2	FZJH10-185/95	4	≥75	≥42	≥50	476	≤18.3kA 0.1s	7.3kA/1°-5%S
3	FZJH10-240/150	4	≥75	≥42	≥50	476	≤25.6kA 0.1s	7.3kA/1°-5%S
4	FZJH10-240/240	4	≥75	≥42	≥50	476	≤25.6kA 0.1s	7.3kA/1°-5%S

10kV Composite Pillar Grounding Ring

Products Details

Featured Products

Contact us